Stock Number: EQU006346
Make: JLG
Model: 400S
Year: 2003


Stock Number: 2-18-UEF95
Make: Misc
Model: FORKS


Stock Number: 206495
Make: CAT
Model: P9000
Year: 2012


Stock Number: 212535
Make: JLG
Model: 1932RS
Year: 2014


Stock Number: 211866
Make: JLG
Model: 800AJ
Year: 2013


Stock Number: 301791
Make: Daewoo
Model: GC30E-3
Year: 1999


Stock Number: EQU007776
Make: Kalmar
Model: KLMV25-1200
Year: 1985


Stock Number: EQU002044
Make: Kalmar
Model: DCE90-45E6
Year: 2003


Stock Number: 1-16-232265
Make: Spyder
Model: URW295
Year: 2014


Stock Number: EQU007788
Make: Taylor
Model: Y85WOC


Stock Number: 2-18-UEATT-16
Make: Misc
Model: CARRIAGE


Stock Number: 300307
Make: CAT
Model: GP25N5
Year: 2015


 
Daewoo Propane Forklifts

Daewoo Propane Forklifts

Change a Propane Tank
Forklifts powered by propane are common in warehouse settings. These forklifts have a propane mount located at the rear of the operator. These tanks have to be replaced from time to time since they have limited lifespans. Forklift drivers should always utilize care when handling propane tanks. Compressed gases are hazardous, particularly because the gas is flammable. Utilize care when removing and replacing propane tank to prevent being injured.

1 If there is a need to replace the propane tank, the first step is to stop the lift truck, then turn off the tank valve. The lift truck should be left on until the engine dies. This procedure burns the gas off inside the transfer hose which connects the engine and the tank. Prior to taking the second steps, wear the correct safety equipment, like for instance insulated gloves made of either leather or neoprene. It is very vital for you to protect your skin from contact with the compressed gas, that is extremely cold.
2 Disconnect the hose from the tank and take off the holding straps to remove the tank. When you put in a new tank, reconnect the holding straps and reconnect the hose at the valve of the tank by tightening the nut.
3 Leaks can be inspected just by applying soapy water to the valve and opening it slightly. If there is a leak, it would cause bubbles to froth from around the valve. If this occurs, check the connection hose at the nut and the valve area. Re-tighten the connecting nut if you detect any leaks around the valve area, and afterward do the leak checking process all over again. Persistent leaks mean that both the connecting hose and nut must be replaced. However, if replacing the nut and hose still does not stop the leak, the tank should be replaced.
4 Open the valve all the way to allow the gas to fill the connecting hose. Then you can start the lift truck and continue operating.

  • CAT 4 Wheel Drive Forklifts
    Mostly rough terrain vehicles are used to handle stacks of wood, pallets of concrete blocks and other handling tasks on rough surfaces ... More
  • Trek Sweepers
    TREK Cleaning Machines is a maker of cleaning equipment that have a passion for the cleaning business. The company's creative nature is ... More
  • Eagle Picher Rough Terrain Forklifts
    The rough terrain forklift is a great machine for numerous outdoor material handling and construction tasks. Normally, rough terrain ... More
  • Terex Scissor Lifts
    Scissor Lifts Scissor lifts were initially designed to offer larger work space while raising bigger loads. They are usually utilized to ... More
  • JLG Aerial Work Platforms
    JLG aerial work platforms could get the job done, whether you are lifting from 10 feet to 150 feet. JLG provides over 50 various models ... More