Stock Number: 232177
Make: WackerNeuson
Model: WK HI400HD D
Year: 2013

Stock Number: 301399
Make: Capacity
Model: TJ7000
Year: 2004

Stock Number: UEF85
Make: Misc
Year: 2013

Stock Number: EQU005757
Make: Hyster
Model: E30Z
Year: 2010

Stock Number: 301400
Make: Capacity
Model: TJ7000
Year: 2004

Stock Number: 300283
Make: CAT
Model: GP30N5
Year: 2015

Stock Number: 231774
Make: Tico
Model: ProSpotter
Year: 2014

Stock Number: 206495
Make: CAT
Model: P9000
Year: 2012

Stock Number: 212542
Make: JLG
Model: 3248RS
Year: 2014

Stock Number: 232040
Make: Magnum
Model: MMG35
Year: 2013

Stock Number: 2-18-UEF51
Make: Misc
Model: FORKS

Stock Number: 301401
Make: Capacity
Model: TJ7000
Year: 2004

Doosan IC Forklifts

Doosan IC Forklifts

How to Utilize a Lift truck
Lift trucks are lifting equipment that can transport loads. They are commonly used in a variety of industries to move heavy supplies. They can be found at airports, building supply companies and warehouses. Any individual operating a forklift must be taught to cautiously use the machinery. It is essential to be completely aware of one's environment when driving a forklift. Lift trucks are designed to run on propane, gasoline, diesel or batteries. Typical lift trucks are popular in various commercial applications and are not difficult to use with proper training. The following steps outline the basics of utilizing a lift truck:

1 Get familiar with all the levers that are used to move and maneuver the cargo from location to another place. The levers could be found to the right side of the steering wheel.
2 The first lever can move the tines up and down. Pushing the lever away from your body moves them down and pulling the lever towards your body moves the tines up. Forks should be kept close to the ground except when unloading or loading.
3 The other two levers control the tilt as well as the right/left movement of the tines. The blades are designed to tilt between 15 and 30 degrees. It is recommended that you practice prior to picking up a load. Utilizing the second lever, push it away from you to tilt the forks forward, and pull it towards you to tilt the tines back.
4 Lever number 4 is used to control the side to side movement of the forks from left to right. Just move the lever in the direction of where you want the blades to move: right in order to move the tines right and left to move the tines left.
5 Always approach a load carefully. Lower the forks and drive forward carefully until the blades slide under the load. After that lift the blades a few centimeters by pulling the lever towards you. If the load is top-heavy, you must tilt the blades backwards a small amount for balance.
6 Safe driving regulations include slowly taking corners and honking to alert pedestrians or other personnel that the lift truck is approaching. Approach the place where you will be working with care. Control the levers to maneuver the load to where it is going. When the load is positioned, reverse gears and cautiously back away.
7 Lift trucks stop in much the same way as other kinds of vehicles. The brake is located to the left side of the accelerator. When stopped, put the gear into "park."

  • CAT 4 Wheel Drive Forklifts
    Mostly rough terrain vehicles are used to handle stacks of wood, pallets of concrete blocks and other handling tasks on rough surfaces ... More
  • Trek Sweepers
    TREK Cleaning Machines is a maker of cleaning equipment that have a passion for the cleaning business. The company's creative nature is ... More
  • Eagle Picher Rough Terrain Forklifts
    The rough terrain forklift is a great machine for numerous outdoor material handling and construction tasks. Normally, rough terrain ... More
  • Terex Scissor Lifts
    Scissor Lifts Scissor lifts were initially designed to offer larger work space while raising bigger loads. They are usually utilized to ... More
  • JLG Aerial Work Platforms
    JLG aerial work platforms could get the job done, whether you are lifting from 10 feet to 150 feet. JLG provides over 50 various models ... More