During the late 1990's, a Nissan Propane Forklift would have cost roughly $11,000 to $14,000 to purchase a brand new one. You are now able to purchase a second-hand model with this amount, with fewer than 5,000 operating hours and has approximately 15 feet of lifting capacity and cushion tires. However, a second-hand Nissan forklift truck which has less than 5,000 hours could be found for under $7,000. This alternative might be a little bit of an older unit than some others, but keep in mind; everything revolves around the operating hours. A model like this will most likely have a pretty good load capacity of about 5,000 pounds.
Newer Nissan forklifts from 2005 to the current year, could be found priced near $10,000. Typically, these units would have a standard lift capacity ranging from 4,000 to 5,000 lbs. Normally, a unit like this will have cushion tires and run smoothly. Of course, newer units normally work smoother than older ones.
Types of Forklifts
The forklift is usually categorized in 2 separate manners: by the kind of fuel it takes and the structure of the lift truck. Based on structure, the following kinds of lift trucks are amongst the most common:
Standard Forklift: Standard lift trucks comprise the familiar warehouse forklift. These types of forklifts provide a lifting capacity of 3,000 to 5,000 lbs. They have a height capacity of approximately 20 feet.
Reach Forklift: The narrow aisle forklift and reach forklift are the type of forklifts found in distribution centers and warehouses that have limited storage space. Narrow construction means that it could not carry as much as a standard forklift model, however, it has an extendable mast that could easily lift loads roughly 40 feet.
Telescopic Forklift: Telescopic lift trucks are also referred to as telehandlers, telescopic handler or extendable reach forklifts. These kinds forklift trucks are a more rugged and heavy-duty version of a regular lift truck. These models offer a telescopic boom that is capable of being extended out and raised up. Usually, these units are utilized on rough terrain. They are able to handle loads up to 70 feet high and could move loads weighing more than 30,000 lbs. handle loads up to 70 feet high
Straight Mast Forklift: The straight mast forklift is most normally utilized to perform tasks on rough terrain. These kinds of lift trucks are only capable of moving loads vertically, unlike a telescopic unit. These models can raise loads up to 12,000 pounds, while reaching a height of 10 to 30 feet.